Uluslararası Hakemli Dergilerde Yayımlanan Makaleler (SCI & SCIE & SSCI & Arts and Humanities) 

Celep, Z., Özcan, Z. (2023). Forced vibrations of an elastic rectangular plate supported by unilateral edge lateral springs. Arabian Journal for Science and Engineering, Volume 48, Issue 6, https://doi.org/10.1007/s13369-023-07939-x,

İmeci, M.Y., İmeci, Ş. T., Daşbaşı, R. (2023, January). A 41% bandwidth microstrip patch Antenna. Defense and Security Studies, vol. 4 pp.52-58. https://doi.org/10.37868/dss.v4.id186 ISSN 2744-1741

İmeci, M. Y., Tütüncü, B., İmeci, Ş. T. (2023, March). A 3-dB 90 degrees microstrip hybrid directional coupler at 2.27 GHz. International Journal of Electronics and Communications, https://doi.org/10.1016/j.aeue.2023.154606, ISSN/eISSN 1434-8411 / 1618-0399

İmeci, Ş. T., Tütüncü, B., Herceg, L. (2023, March). Performance‐Enhanced S‐Shaped Slotted Patch Antenna for X Band/Ku Band Applications. Wireless Personal Communications. Vol. 129(2): pp1069–1082. DOİ: https://doi.org/10.1007/s11277-023-10174-0, ISSN/eISSN 0929-6212 / 1572-834X

Kašibović, A., İmeci, Ş. T., Uslu, A. F. (2023, March). An inset-fed rectangular microstrip patch antenna with multiple slits for sub 6GHz – 5G applications, Sustainable Engineering and Innovation, ISSN 2712-0562 Vol. 5, No. 1, pp.15-21 https://doi.org/10.37868/sei.v5i1.id181

Kiani, F., Anka, FA., Erenel, F. (2023). PSCSO: Enhanced Sand Cat Swarm Optimization Inspired by the Political System to Solve Complex Problems. Advances in Engineering Software, Elsevier, SCI, (Q1), IF 4.26, 178, https://doi.org/10.1016/j.advengsoft.2023.103423.

Kiani, F., Nematzadeh, S., Anka, F.A., Findikli, M.A. (2023). Chaotic sand cat swarm optimization. Mathematics, SCI, (Q1), IF: 2.59, TOP10, 1-46, https://doi.org/10.3390/math11102340

Kiani, F., Nematzadeh, S., Seyyedabbasi, A., Torkamanian, M. (2023). Maximizing Coverage and Maintaining Connectivity in WSN and Decentralized IoT: An Efficient Metaheuristic-based Method for Environment-Aware Node Deployment. Neural Computing and Application, Springer, SCI, (Q2), IF: 5.61, 35, 611-641.

Kiani, F., Sarac, O. (2023). A Novel Intelligent Traffic Recovery Model for Emergency Vehicles Based on Context-Aware Reinforcement Learning. Information Sciences, Elsevier, SCI, (Q1), IF: 8.23, TOP10, 619, 288-309.

Köse, U., Ekmekçi, E. (2023). The effects of the dielectric substrate thickness and the loss tangent on the absorption spectrum: a comprehensive study considering the resonance type, the ground plane coupling, and the characterization setup. Turkish Journal of Electrical Engineering and Computer Sciences, 31(1), 97-111.

Özkan, H., Aydın, M., Özcan, O. A., Zengin, Ü. (2023). A portable multispectral vein imaging system. Journal of Electrical Engineering, 64-69.

Öztürk, S., Doran, B., Aksoylar, C. (2023). Effect of time step interval and time integration schemes in Pseudo-Dynamic analysis. Structures, 50, p.215-230, Doi: https://doi.org/10.1016/j.istruc.2023.02.013.

 Rastad, S., Barjaste, N., Lanjanian, H., Moeini, A., Kiani, F., Masoudi-Nejad, A. (2023). Parallel molecular alteration between Alzheimer’s disease and major depressive disorder in the human brain dorsolateral prefrontal cortex: an insight from gene expression and methylation profile analyses, Genes & Genetic Systems. The Genetics Society of Japan, SCI (Q3)IF: 1.34, 97 (6), 311-324.

Sahmoud, S., Topcuoglu, H. R. (2023). Dynamic multi-objective evolutionary algorithms in noisy environments. Information Sciences, 634, 650-664. (Q1)

Skula, M., Gafic, I., İmeci, Ş. T. (2023, March).  High Frequency Compact Microstrip Low Pass Filter, Southeast Europe Journal of Soft Computing, Vol 12, No. 1, pp. 04-07, ISSN 2233 -1859, http://dx.doi.org/10.21533/scjournal.v12i1.246

Ünlü, H., Turfanda, A. (2023). Mimicking bacterial learning and memory in Tungsten based two-sided single layers of WSeO, WSeS, WSeSe, and WSeTe. Journal of Applied Physics.

Akkan, C., Gülcü, A., Kuş, Z. (2022). Bi-criteria simulated annealing for the curriculum-based course timetabling problem with robustness approximation. Journal of Scheduling, 1-25.

Allahviranloo, T., Kiani, F. et al. (2022). The Best Approximation of Generalized Fuzzy Numbers Based on Scaled Metric. Journal of Mathematics, SCI, (Q1), IF: 1.56, 1-8.

Avcı, C., Kesgin, E., Atam, M., Tan, R.İ. (2022). Modeling agricultural practice impacts on surface water quality: case of Northern Aegean watershed. International Journal of Environmental Science and Technolog, Turkey. https://link.springer.com/article/10.1007/s13762-022-04477-1

Babaarslan, M., Bektaş Demirci, B., Genç, R. (2022). Spacelike loxodromes on helicoidal surfaces in Lorentzian n-Space, Differential Geometry-Dynamical System, 24, 18-33.

Bektaş Demirci, B. (2022). On rotational surfaces in 3-dimensional de Sitter space with Weingarten condition, Mediterranean Journal of Mathematics, 19(3), 1-17. (SCI)

Bektaş Demirci, B. (2022). Ricci solitons on pseudo-Riemannian hypersurfaces of 4-dimensional Minkowski space. Journal of Geometry and Physics(SCI), 174, 104451.

Bezir, F., Öztürk, S., Sarı, A., Akgül, K. (2022). Fragility Analysis of Atmospheric Storage Tanks by Observational and Analytical Data. Int J Steel Struct, DOI: https://doi.org/10.1007/s13296-021-00567-x

Celep, Z., Gençoğlu, M. (2022). Forced vibrations of an elastic circular plate supported by unilateral edge lateral springs. Structural Engineering and Mechanics, Vol. 83, No. 4, 451-463. Doi: https://doi.org/10.12989/sem.2022.83.4.451.

Çiçek, A., Şengör, İ., Güner S., Karakuş F., Erenoğlu, A. K., Erdinç, O., Shafie-khah, M., Catalão, J. P. S. (2022). Integrated Rail System and EV Parking Lot Operation with Regenerative Braking Energy. Energy Storage System and PV Availability. IEEE Transactions on Smart Grid, (Accepted for publication)

Demir, İ., Kiraz, B., Corut Ergin, F. (2022, May). Experimental evaluation of meta-heuristics for multi-objective capacitated multiple allocation hub location problem. Engineering Science and Technology, an International Journal, Volume 29. 

Eidinejad, Z., Saadati, R., Allahviranloo, T., Kiani, F., Noeiaghdam, S., Fernandez-Gamiz, U. (2022). Existence of a unique solution and the Hyers-Ulam-H-Fox stability of the Conformable Fractional Differential Equation by matrix valued fuzzy controllers. Complexity, SCI-E, (Q2), IF 2.12, 2022, 1-26.

Eren, F., Aslan, M., Kanarya, D., Uysalli, Y., Aydın, M., Kiraz, B. Aydın, O., Kiraz, A. (2022). DeepCAN: A Modular Deep Learning System for Automated Cell Counting and Viability Analysis. IEEE Journal of Biomedical and Health Informatics.

Erenoğlu A. K. & Erdinç O. (2022). Real-time Allocation of Multi-mobile Resources in Integrated Distribution and Transportation Systems for Resilient Electrical Grid. In IEEE Transactions on Power Delivery, doi: 10.1109/TPWRD.2022.3206272.

Erenoğlu, A. K., Sancar, S., Terzi, İ. S., Erdinç, O., Shafie-khah, M., Catalão, J. P. S. (2022). Resiliency-Driven Multi-Step Critical Load Restoration Strategy Integrating On-Call Electric Vehicle Fleet Management Services. IEEE Transactions on Smart Grid, DOI: 10.1109/TSG.2022.3155438.

Gazioğlu, E., Etaner Uyar. A. Ş.  (2022, 18 May). Experimental analysis of a statistical multiploid genetic algorithm for dynamic Environments. Engineering Science and Technology, an International Journal, Elsevier, Doi: https://doi.org/10.1016/j.jestch.2022.101173.

Kaymaz Özcanlı, A., Baysal, M. (2022). Islanding detection in microgrid using deep learning based on 1D CNN and CNN-LSTM networks. Sustainable Energy, Grids and Networks, Volume 32, 100839, ISSN 2352-4677, Doi: https://doi.org/10.1016/j.segan.2022.100839.

Kısasöz Özbay, B., Serhatlı, İ. E., Bulduk, M. E. (2022). SLS Manufacturing and Characterization of Lightweight PA 12 Polymer Composites with Different Hollow Microsphere Additives. Journal of Materials Engineering and Performance, DOI: 10.1007/s11665-021-06481-x (SCI-Exp).

Nizam, A. (2022). Software Project Failure Process Definition. IEEE Access. (SCIE)

Olmez, Y., Ozmen Koca, G., Akpolat, Z. H. (2022, July). Clonal selection algorithm based control for two-wheeled self-balancing mobile robot. Simulation Modelling Practice and Theory, Vol. 118, 102552, Doi: https://doi.org/10.14016/j.simpat.2022.102552. (SCI-Exp)

Sahmoud, S., Shadi, A., Wisam, E. (2022). AT-ODTSA: a Dataset of Arabic Tweets for Open Domain Targeted Sentiment Analysis. International Journal of Computing and Digital Systems, 11.1.

Sawah, D., Sahloul, M., Çiftçi, F. (2022). Nano-material utilization in stem cells for regenerative Medicine. Biomedical Engineering / Biomedizinische Technik,  De Gruyter, DOI: https://doi.org/10.1515/bmt-2022-0123

Şengör İ., Erenoğlu A. K., Güldorum C., Erdinç O., Tascikaraoglu A., Taştan İ.C., Büyük A.F., Catalao J.P.S. (2022). Optimal Sizing and Siting of Different Types of EV Charging Stations in a Real Distribution System Environment. IET Renewable Power Generation, (SCI Expanded İndekslerine Giren Dergi), Doi: https://doi.org/10.1049/rpg2.12566.

Aksoylar, C. & Aksoylar, N. (2021). Online Model Identification and Updating in Multi-Platform Pseudo-Dynamic Simulation of Steel Structures – Experimental Applications. Journal of Earthquake Engineering, DOI: 10.1080/13632469.2021.1927888.

Bekem, A., Özbay, B., Bulduk, M. E. (2021). Seçici Lazer Sinterlemede Poliamid 12’ye Dendritik Bakır Tozu İlavesinin Etkisi. Journal of The Faculty of Engineering and Architecture of Gazi University, 36 (1), 421-431. DOI: 10.17341/gazimmfd.728198 (SCI-Exp).

Bulut, E. B., Gülbahçe, M. O., Kocabas, D. A. (2021). Analysis of a GaN Based PWM AC-AC Converter with an Improved Switch Loss Model. AEUE- International Journal of Electronics and Communications, Vol. 131, 153578, ISSN 1434-8411. (SCI-Q1)

Çalışkan, C. İ., Özer, G., Coşkun, M., Koç, E. (2021, 11 April). Investigation of direct metal laser sintering downskin parameters’ sagging effect on microchannels. The International Journal of Advanced Manufacturing Technology.

Çiftçi, F., N. D. (2021). Antibacterial and cellular behavior of PLA-based Bacitracin and Zataria Multiflora nanofibers produced by electrospinning method. The International Journal of Polymeric Materials and Polymeric Biomaterials, 1-16. Doi: https://doi.org/10.1080/00914037.2021.2008391

Çiftçi, F., S. A. (2021). Selenium and Clarithromycin Loaded PLA-GO Composite Wound Dressings by Electrospinning Method. The International Journal of Polymeric Materials and Polymeric Biomaterials, 1-13. Doi: https://doi.org/10.1080/00914037.2021.1925276

Fathee, Hala, Sahmoud, S. (2021). Iris segmentation in uncooperative and unconstrained environments: State-of-the-art, datasets and future research directions. Digital Signal Processing. 103244.bilf

Gülbahçe, M. O., Kocabaş, D. A., Lordoğlu, A. (2021, Mart). A Comprehensive Disturbing Effect Analysis of Multi-Sectional Rotor Slot Geometry for Induction Machines in Electrical Vehicles. In IEEE Access, vol.9, pp. 49590-49600. Doi: 10.1109/ACCESS.2021.3068821

Gülcü, A., Kuş, Z., Akkan, C. (2021, Mart). Minimum Penalty Perturbation Heuristics for Curriculum-based Timetables Subject to Multiple Disruptions. Computers and Operations Research, vol. 132, DOI: 10.1016/j.cor.105306. (SCI)

Gülcü, A., Kuş, Z. (2021). Multi-objective simulated annealing for hyper-parameter optimization in convolutional neural networks. PeerJ Computer Science, 7, e338. DOI: 10.7717/peerj-cs.338. (SCIE)

Khan, H. M., Kaynak, Y., Karabulut, Y., Özhan, K., IS Jawahir. (2021). Influence of finish-machining/post-processing on components produced by Selective Laser Melting Additive Manufacturing: A review on surface roughness, microstructural and mechanical properties. Machining Science and Technology. (SCIE)

Khan, H. M., Şirin, T. B., Tarakçı, G., Bulduk, M. E., Coşkun, M., Koç, E., Kaynak, Y. (2021). Improving the surface quality and mechanical properties of selective laser sintered PA2200 components by the vibratory surface finishing process. SN Applied sciencei. (SCIE)

Koca, A. (2021). A comprehensive approach to analyze the discrepancies in heat transfer characteristics pertaining to radiant ceiling heating system. Applied Thermal Engineering. (SCI-Q1)

Korkmaz, D., Özmen Koca, G., Lİ, G., Bal, C., Ay, M., Akpolat, Z.H. (2021, March). Locomotion control of a biomimetic robotic fish based on closed loop sensory feedback CPG model. Journal of Marine Engineering and Technology, 20 (2), 125-137.

Küçüköner, E. M., Çınar, A., Köse, U., Ekmekci, E. (2021, 10 Nisan). Electrical Size Reduction of Microstrip Antennas by Using Defected Ground Structures Composed of Complementary Split Ring Resonator. Advanced Electromagnetics, 10 (1), 62-69. (SCIE).

Özbay, B., Bekem, A., Serhatlı, İ. E., Öztürk, S., Bulduk, M. E. (2021). Effects of Copper Fillers on Mechanical and Electrical Properties of Selective Laser Sintered PA 12-Cu Composites. Materials Technology: Advanced Performance Materials, 1-13. Doi: 10.1080/10667857.2021.1964203 (SCI-Exp).

Öztürk, S., Akgül, K., Sarı, A. (2021). Observational and Numerical Investigation of Seismic Fragility of Pressurized Tanks. South Marmara. Turk. J. Earthq. Res, 3 (1), 33-52. Doi https://doi.org/10.46464/tdad.928967

Rasheed, I., Banka, H., Khan, H. M. (2021). Pseudo-relevance feedback based query expansion using boosting algorithm. Artificial intelligence review. (SCIE)

Tan, R. İ., Arslankaya, E., Kesgin, E., Ağaçcıoğlu, H. (2021, 17 Temmuz). H. Determination of Peaking Factors for Sewerage System in Antalya, Tourism Capital of Turkey. Water Environment Research, 1, 1. Doi https://doi.org/10.1002/wer.1612

Türkmenoğlu, C., Uyar-Etaner, A. Ş., Kiraz, B. (2021, January). Recommending healthy meal plans by optimising Nature-Inspired ManyObjective Diet Problem. Health Informatics Journal. Doi:10.1177/1460458220976719 (SCIE)

Yılmaz, M. S., Özer, G., Şahin, O. (GTÜ), Karaaslan, A. (YTÜ). (2021). Micro Arc Oxidation (MAO) Coating Parameter-Property Relationship in the AA7075-T6. Materials Performance. (SCIE).

Zeybek, S., Pham, D. T., Koç, E., Seçer, A. (2021). An Improved Bees Algorithm for Training Deep Recurrent Networks for Sentiment Classification. Symmetry,13, 1347. Doi https://doi.org/10.3390/sym13081347

Aghayev, N. & Bektaş Demirci, B. (2020). On Geometric Applications Of Quaternions. Turk J. Math, 44, 1289-1303. (SCI).

Bektaş Demirci, B. & Turgay, N. C. (2020, 15 Ağustos). Quasi minimal surfaces of pseudo-Riemannian space forms with positive relative nullity. Journal of Mathematical Analysis and Applications. Doi: https://doi.org/10.1016/j.jmaa.2020.124081

Can, O. M., Şimşek, F. G., Garipcan, B., Kocatürk, O., Ulgen, Y. (2020, April). Characterization of carotid endothelial cell proliferation on Au, Au/GO, and Au/rGO surfaces by electrical impedance spectroscopy. Medical & Biological Engineering & Computing. (SCIE)

Ertuğrul, O., Öter, Z. Ç., Yılmaz, M.S., Şahin, E., Coşkun, M., Tarakçı, G., Koç, E. (2020, Nisan). Effect of HIP process and subsequent heat treatment on microstructure and mechanical properties of direct metal laser sintered AlSi10Mg alloy. Rapid Prototyping Journal. (SCIE)

Göksu, Ö. F. (2020, 2 May). Low Voltage Battery Management System with Internal Adaptive Charger and Fuzzy Logic Controller. Energies. (SCI).

Gülcü, A. & Çalışkan, S. (2020, 31 October). Clustering Electricity Market Participants via FRM Models. Intelligent Decision Technologies: An International Journal, to appear. -Scopus

Gülcü, A. & Kuş, Z., Hyper-Parameter Selection in Convolutional Neural Networks Using Microcanonical Optimization Algorithm. IEEE Access, 8, 52528-52540.

Khan, H. M., Kaynak, Y., Karabulut, Y., Özhan, K., Jawahir, I. (2020, Aralık). Influence of finish-machining/post-processing on components produced by Selective Laser Melting Additive Manufacturing: A review on surface roughness, microstructural and mechanical properties. Machining science and technology. (SCIE)

Khan, H. M., Özer, G., Tarakçı, G., Coşkun, M., Koç, E., Kaynak, Y. (2020, Aralık). The impact of aging and drag-finishing on the surface integrity and corrosion behavior of the selective laser melted maraging steel samples. Material science and Engineering technology. (SCIE)

Khan, H. M., Rasheed, I., Banka, H. (2020, Kasım). Building a text collection for Urdu information retrieval. ETRI Journal. (SCIE)

Koç, E., Çalışkan, C. İ., Coşkun, M., Khan, H. M. (2020, Haziran). Unmanned Aerial Vehicle Production with Additive Manufacturing. Journal of Aviation.

Mert, M. & Özkan, M. T. (2020). A new hyperbolic variation method for settlement analysis of axially loaded single friction piles. Arabian Journal of Geosciences, 13 (794). (SCI).

Özbay, B., Bekem, A., Ünal, A. (2020). Manufacturing of Hybrid Yarn Thermoplastic Composites by the Method of Filament Winding. Gazi University Journal of Science, 33 (1), 214-227. DOI: 10.35378/gujs.456076 (ESCI).

Özbay, B., Serhatlı, İ. E. (2020). Processing and Characterization of Hollow Glass-Filled Polyamide 12 Composites by Selective Laser Sintering Method. Materials Technology: Advanced Performance Materials, 1-11. DOI: 10.1080/10667857.2020.1824149 (SCI-Exp).

Özer, G., Özbay, B., Öter, Z. Ç., Tarakçı, G., Yılmaz, M. S., Bulduk, M. E., Koç, E., Acar, S., Güler, K. A. (2020, Mayıs). Investigation of the Surface Quality and Dimensional Accuracy of Polymer Patterns Produced by Selective Laser Sintering (SLS) Method for Investment Casting (IC). International Journal of Cast Metal Research, 33, 2-3. DOI: 10.1080/13640461.2020.1773053 (SCI-Exp).

Özer, G., Yalçıner, G., Kısasöz, A., Karaaslan, A. (2020, Ocak). Influence of the Phase Balance and Cooling Conditions on the Microstructure and Corrosion Behavior of Solution-Treated 1.4462 Duplex Stainless Steel. Materials Research Express. (SCIE)

Söylemez, E., Koç, E., Coşkun, M. (2020, Mayıs). Thermo-Mechanical Simulations of Selective Laser Melting for AlSi10Mg Alloy to Predict the Part Scale Deformations. Progress in Additive Manufacturing.

Tuna, S., Töreyin, B. U., Demiralp, M., Ren, J., Zhao, H., Marshall, S. (2020). Iterative Enhanced Multivariance Products Representation for Effective Compression of Hyperspectral Images. IEEE Transactions on Geoscience and Remote Sensing (TGRS), DOI: 10.1109/TGRS.2020.3031016 (SCI).

Yılmaz, M. S., Özer, G., Şahin, O., Karaaslan, A. (2020, Ekim). Micro Arc Oxidation (MAO) Coating Parameter-Property Relationship in the AA7075-T6. Materials Performance. (SCIE)

Akpolat, Z. H., Korkmaz, D., Özmen Koca, G., Bal, C., Ay, M. (2019). CPG-based autonomous swimming control for multi-tasks of a biomimetic robotic fish. Ocean Engineering 189, 1-15.

Akpolat, Z. H., Korkmaz, D., Özmen Koca, G., Li, G., Bal, C., Ay, M. (2019). Locomotion control of a biomimetic robotic fish based on closed loop sensory feedback CPG model. Journal of Marine Engineering & Technology, 1638703. DOI: 10.1080/20464177.

Ateş, M., Bayrak, Y., Özkan, H., Yörük, O., Yıldırım, M., Kuzgun, O. (2019). Synthesis of rGO/TiO 2/PEDOT nanocomposites, supercapacitor device performances and equivalent electrical circuit models. Journal of Polymer Research, 26 (2), 49. Doi: 10.1007/s10965-018-1692-2

Ateş, M., Yıldırım, M., Kuzgun, O., Özkan, H. (2019). The synthesis of rGO, rGO/RuO2 and rGO/RuO2/PVK nanocomposites, and their supercapacitors. Journal of Alloys and Compounds, 787, 851-864. Doi: 10.1016/j.jallcom.2019.02.126

Aydın, M., Morova, B., Bavili, N., Yaman, O., Yiğit, B., Zeybel, M., Doğan, B., Kasztelanic, R., Pysz, D., Buczynski, R., Kiraz, A. (2019). Fabrication and characterization of large numerical aperture, high-resolution optical fiber bundles based on high-contrast pairs of soft glasses for fluorescence imaging. Opt. Express, 27, 9502-9515.

Bal, C., Özmen Koca, G., Korkmaz, D., Akpolat, Z. H., Ay, M. (2019). CPG-based autonomous swimming control for multi-tasks of a biomimetic robotic fish. Ocean Engineering, 189, 106334. Doi: https://doi.org/10.1016/j.oceaneng.2019.106334.

Çalışkan, C. İ., Koç, E., Khan, H. M., Bulduk, M. E. (2019). Double Stud Cargo Fitting Research in Air Cargo Loading Models. Lightened Cargo Clip Design and Analysis Study.

Demir, İ., Ergin, F. C., Kiraz, B. (2019). A New Model for the Multi-Objective Multiple Allocation Hub Network Design and Routing Problem. In IEEE Access, 7, 90678-90689.

Ekmekci, E., Köse, U., Çınar, A., Ertan, O., Ekmekci, Z. (2019). The Use of Metamaterial Type Double-Sided Resonator Structures in Humidity and Concentration Sensing Applications. Sensors and Actuators A: Physical, 297, 111559.

Gülcü, A. & Akkan, C. (Revision Requested on June, 3, 2019). Robust University Course Timetabling Problem Subject to Single and Multiple Disruptions. European Journal of Operational Research- EJOR. (SCIE)

Gülcü, A. & Bulkan, S. (2019, 16 April). Integer Programming versus Constraint Programming: A Course Timetabling Case Study. International Journal of Industrial Engineering: Theory, Applications and Practice- IJIETAP. (SCIE)

Güler, K. A., Kısasöz, A., Özer, G., Karaaslan, A. (2019). Cooling slope casting of AA7075 combined with reheating and thixoforging. Transactions of Nonferrous Metals Society of China, in press.

Kavas, A., Sağlam, M. İ., Kartal, M. (2019). A new long term evolution downlink delay based lean scheduler. IEEJ Transactions on Electrical and Electronic Engineering, 14 (5), 742-747. Doi: 10.1002/tee.22860 (Yayın No: 5545801)

Kısasöz, A., Özer, G., Karaaslan, A. (2019). Effect of secondary phases on 475˚C embrittlement of 1.4462 and 1.4501 duplex stainless steels at short-term heat treatment conditions. Materials Research Express, in press. Doi: https://doi.org/10.1088/2053-1591/ab4b38.

Koca, A., Nasırı Khalajı, M., Kotçioğlu, İ. (2019). Investigation of Numerical Analysis Velocity Contours k-ε Model of RNG, Standard and Realizable Turbulence for Different Geometries. International Journal of Innovative Research and Reviews, 3 (2), 29-34.

Koca, A. (2019). Numerical Simulation of Annular Flow boiling in Millimeter-scale Channels and Investigation of Design Parameters Using Taguchi Method. Bilge International Journal of Science and Technology Research, 3 (Special Issue), 45-57.

Korkmaz, D., Özmen Koca, G., Li, G., Bal, C., Ay, M., Akpolat, Z. H. (2019). Locomotion control of a biomimetic robotic fish based on closed loop sensory feedback CPG model. Journal of Marine Engineering & Technology, 1-13. Doi: https://doi.org/10.1080/20464177.2019.1638703.

Öter, Z. Ç., Coşkun, M., Akça, Y., Sürmen, Ö., Yılmaz, M. S., Özer, G., Tarakçı, G., Khan, H. M., Koç, E. (2019). Support optimization for overhanging parts in direct metal laser sintering. OPTIK, 181, 575-581.

Öter, Z. Ç., Coşkun, M., Akça, Y., Sürmen, Ö., Yılmaz, M. S., Özer, G., Tarakçı, G., Koç, E. (2019). Benefits of laser beam based additive manufacturing in die production. OPTIK, 176, 175-184.

Özer, G., Çağatay, Ö. Z., Coşkun, M., Akçay, Y., Sürmen, Ö., Yılmaz, M. S., Tarakçı, G., Mahmood, K. H., Koç, E. (2019). Support optimization for overhanging parts in direct metal laser sintering. OPTIK, 181, 575-581.

Özer, G., Gecu, R., Karaaslan, A. (2019). The effect of retrogression and re‐aging treatment on mechanical and tribological features of AA7075 aluminium alloy, Materialwiss. Werkstofftech, 50, 761–768.

Özer, G. & Karaaslan, A. (2019). Effects of RRA heat treatment on the exfoliation corrosion (EXCO), intergranular corrosion (IGC), and electrical conductivity of AA7075 alloy. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 70 (3), 549-557.

Özer, G., Kaya, I., Karaaslan, A. (2019). Effects of retrogression and reaging heat treatment on the microstructure, exfoliation corrosion, electrical conductivity, and mechanical properties of AA7050. Materials And Corrosion Werkstoffe Und Korrosion, 70 (9), 1788-1797.

Özer, G., Kısasöz, A., Karaaslan, A. (2019). Investigation of the relationship between intergranular corrosion and retrogression and reaging in the AA6063. Materials And Corrosion-Werkstoffe Und Korrosion, in press. Doi: 10.1002/maco.201911100.

Özer, G., Tarakçı, G., Yılmaz, M. S., Öter, Z. Ç., Sürmen, Ö., Akça, Y., Coşkun, M., Koç, E. (2019). Investigation of the effects of different heat treatment parameters on the corrosion and mechanical properties of the AlSi10Mg alloy produced with direct metal laser sintering. Materials And Corrosion Werkstoffe Und Korrosion, in press. Doi: 10.1002/maco.20191117.

Özkan, H., Özhan, O., Karadana, Y., Gülcü, M., Macit, S., Husaın, F. (2019). A Portable Wearable Tele-ECG Monitoring System. IEEE Transactions on Instrumentation & Measurement. Doi: 10.1109/TIM.2019.2895484.

Öztürk, S., Kösemen, Z. A., Kösemen, A., Canımkurbey, B., Erkovan, M., Yerli, Y. (2019). Performance improvement in photosensitive organic field effect transistor by using multi-layer structure. Thin Solid Films, 672, 90-99.

Öztürk, S., Şen, Z., Harbeck, M., Öztürk, Z. Z. (2019). Room-temperature Sensing of Volatile Organic Compounds Using Graphene. Sensors and Materials, 31, 1365-1374.

Söylemez, E., Koç, E., Coşkun, M. (2019). Thermo-Mechanical Simulations of Selective Laser Melting for AlSi10Mg Alloy to Predict the Part Scale Deformations. Progress in Additive Manufacturing.

Çamurcu, A. Y., Yıldız, K., Doğan, B. (2018). Comparison Of Dimension Reduction Techniques On High Dimensional Datasets. International Arab Journal of Information Technology, 15 (2), 1-4. (Yayın No: 2610839)

Khan, H. M., Dirikolu, M. H., Koç, E., Öter, Z. Ç. (2018). Numerical Investigation of heat current study across different platforms in SLM processed multi-layer AlSi10Mg. Optik- International Journal for Light and Electron Optics. (SCI-EXP)

Khan, H. M., Dirikulu, M. H., Koç, E. (2018). Parameters optimization for horizontally built circular profiles: Numerical and Experimental Investigation. Optik- International Journal for Light and Electron Optics. (SCI-EXP)

Koca, A. (2018). A new method that can be used to overcome the condensation risks in radiant cooling systems and thermal comfort examinations. Journal of the Faculty of Engineering and Architecture of Gazi University, 33 (3), 1055-1072. Doi: 10.17341/gazimmfd.416468.

Öter, Z. Ç., Coşkun, M., Koç, E. (2018). Effect of Building Platform Position on the Surface Quality, Dimensional Accuracy, and Geometrical Precision of Direct Metal Laser Sintering (DMLS) Parts. Optik- International Journal for Light and Electron Optics. (SCI-EXP)

Ulus, A., İpek, S. K., Ekici, H., Öter, Z. Ç., Koç, E. (2018). Investigation of Elemental Distribution in the Sheet Sections after Aluminum Continuous Sheet Casting, Cold Rolling and Heat Treatment Processes, Minerals, Metals and Materials Series.

Celep, Z., Baş, S., Apaydın, N. M. (2016). Earthquake performance of the two approach viaducts of the Bosphorus suspension bridge. Earthquakes and Structures, 11, 3, 387-406 Doi: http://dx.doi.org/10.12989/eas.2016.11.3.387.

Celep, Z., Yazgan, U., Oyguç, R., Ergüven, M. E. (2016). Seismic performance of buildings during 2011 Van earthquakes and rebuilding efforts. Earthquake Engineering and Engineering Vibration, September, 15, 3, 591–606. Doi: http://dx.doi.org/10.1007/s11803-016-0346-9.

Cini, U., Aktan, M., Morgül, A. (2016). An alternative carry-save arithmetic for new generation field programmable gate arrays. Turkısh Journal Of Electrıcal Engıneerıng And Computer Scıences, 24, 2, 435-447.

Çamurcu, A. Y. & Pala, T. (2016, March). Design of Decision Support System in the Metastatic Colorectal Cancer Data Set and Its Application. Balkan Journal Of Electrıcal & Computer Engıneerıng, Vol. 4, No. 1, 12-18.

Çamurcu, A. Y., Tunali, V., Bilgin, T. (2016). An Improved Clustering Algorithm for Text Mining: Multi-Cluster Spherical K-Means. International Arab Journal of Information Technology (IAJIT) 13, 1.

Güçlü, Y. S., Şişman, E., Yeleğen, M. Ö. (2016). Climate change and frequency-intensity-duration (FID) curves for Florya station, İstanbul. Journal of Flood Risk Management. Doi: http://dx.doi.org/10.1111/jfr3.12229.

Özkan, H. (2016). A Comparison of Classification Methods for Telediagnosis of Parkinson’s Disease. Entropy, 18, 115. Doi: 10.3390/e18040115

Özkan, H. & Kayhan, O. S. (2016). A Novel Automatic Rapid Diagnostic Test Reader Platform. Computational and Mathematical Methods in Medicine. v. 2016, 1-10. Doi:http://dx.doi.org/10.1155/2016/7498217

Öztürk, S., Kösemen, A., Kösemen, Z. A., Kılınç, N., Öztürk, Z. Z., Penza, M. (2016). Electrochemically growth of Pd doped ZnO nanorods on QCM for room temperature VOC sensors. Sensors and Actuators B: Chemical, 222, 280–289.

Çamurcu, A. Y. & Demir, Ö. (2015). Computer-aided detection of lung nodules using outer surface features. Bio-Medical Materials and Engineering, 26, 1, 1213-1222.

Çamurcu, A. Y., Tunali, V., Bilgin, T. (2015). An Improved Clustering Algorithm for Text Mining: Multi-cluster Spherical K-means. International Arab Journal of Information Technology, 13 (1).

Özkan, H., Ateş, M., Kamer, L. (2015). Comparative analysis of poly (N-methylpyrrole) and its titanium dioxide nanocomposite film formations against equivalent electrical circuit model for the their corrosion-inhibition effects. High Performance Polymers.

Özkan, H., Berg, B., Cortazar, B., Tseng, D., Feng, S., Weı, Q., Chan, Burbano, J., Farooqui, Q., Lewınskı, M., Carlo, D. D., Garner, O. B., Özcan, A. (2015). Cellphone-Based Hand-Held Micro-Plate Reader for Point-of-Care Testing of Enzyme-Linked Immunosorbent Assays. ACS Nano.

Öztürk, S., Kösemen, A., Kösemen, A. Z., Kılınç, N., San, S. E., Tunç, A. V. (2015). Electrochemical Growth of Pd Doped ZnO Nanorods. Journal of The Electrochemical Society, 162, D142-D146.

Öztürk, S., Sentürk, E., Erkovan, M., Okutan, M., Kösemen, A., Şahin, Y. (2015). Cobalt–titanium multilayer thin films: Effect of thickness of titanium spacer layer on impedance properties. Materials Science in Semiconductor Processing, 30, 482–485.

Çamurcu, A. Y. & Pala, T. (2014). Evaluation of data mining classification and clustering techniques for diabetes. Malaysian Journal of Computing, 2, 1, 37-45.

Ekiz, İ., Börekçi, M., Kırçıl, M. S. (2014, Aralık). Collapse Period of degrading SDOF systems. Earthquake Engineering and Engineering Vibrations, 13, 4681-694.

Güçlü, Y. S., Yeleğen, M. Ö., Dabanlı, İ., Şişman, E. (2014). Solar irradiation estimations and comparisons by ANFIS, Angström-Prescott and dependency models. Solar Energy, 109, 118-124.

Özkan, H., Osman, O., Şahin, S., Boz, A. F. (2014). A Novel method for pulmonary embolism detection in CTA images. Computer Methods and Programs in Biomedicine, 113, 757-766. Doi: http://dx.doi.org/10.1016/j.cmpb.2013.12.014.

Özkan, H., Weı, Q., Luo, W., Hıang, S., Kappel, T., Mejıa, C., Tseng, D., Chan, R. Y. L., Yan, E., Qı, H., Shabbır, F., Fengs, S., Özcan, A. (2014). Imaging and Sizing of Single DNA Molecules on a Mobile Phone. ACS Nano.

Aghayev, N., Ungor, B., Halıcıoğlu, S., Harmancı, A. (2013). Endo-Principally Projective Modules. Novi Sad J. Math., 43, 1, 41-49.

Arslan, E., Minaei, S., Morgül, A. (2013, March). On The Realization Of High Performance Current Conveyors And Their Applications. Journal of Circuits, Systems and Computers, 22, 3, 23. Doi:10.1142/S0218126613500151.

Sarıca, F. & Morgül, A. (2013, Jan). Basic Circuits for Multi-Valued Sequential Logic. Analog Integrated Circuits and Signal Processing, 74, 1, 91-96. Doi: 10.1007/s10470-012-9946-0.

Aksoylar, C., Ömercikoğlu, A., Mecitoğlu, Z., Omurtag, M. H. (2012). Nonlinear Transient Analysis of FGM and FML Plates Under Blast Loads by Experimental and Mixed FE Methods. Composite Structures, 94 (2), 731-744.

Çamurcu, A. Y., Çetin, V., Özekeş, S. (2012). An Iterative Segmentation Method For Region of İnterest Extraction. International Journal of Electronics; Mechanical and Mechatronics Engineering, 3, 1, 201-204.

Doğramacı Aksoylar, N., Elnashaı, S. A., Mahmoud, H. (2012). Seismic Performance of Semirigid Moment-Resisting Frames under Far and Near Field Records. Journal of Structural Engineering, 138, 157.

Aksoylar, C., Omurtag, M. H. (2011). Anlık Basınç Yükü Altındaki Kompozit Plakların Karışık SEM ile Analizi. İMO Teknik Dergi, 5689-5711.

Doğramacı Aksoylar, N., Elnashaı, S. A., Mahmoud, H. (2011). Design and Seismic Performance of Low Rise Long Span Frames with Semi-Rigid Connections. Journal of Constructional Steel Research, 67, (1), 114-126.

Yılmaz, F., Güleç, A., Cevher, Ö., Türk, A., Üstel, F. (2011). Accelerated Corrosion Behaviors of Zn, Al and Zn/15al Coatings on a Steel Surface. Materials and Technology, 45 (5), 477.

Yılmaz, F., Güleç, A., Cevher, Ö., Türk, A., Üstel, F.  (2011, Şubat). Comparison of Performance of TWEA Sprayed Zinc and Zinc/Aluminum 85/15 Coatings for Ductile Iron Pipe Protection. Materials Performance, 50, 2, 30-36.

Bilgin, T. T. & Çamurcu, A. Y. (2010). Development of an Efficient Preprocessing Stage for the Relationship-Based Clustering Framework. Intelligent Data Analysis, 14, 1–181. Doi: 10.3233/ IDA 2010 0449 IOS press. 

Çamurcu, A. Y. & Doğan, B. (2010). Visual Clustering of Multidimensional educational data from an Intelligent Tutoring System. Computer Applications In Engineering Education, Wiley 18, 375–382. Doi: 10.1002/cae

 

Ulusal hakemli dergilerde yayımlanan makaleler

Bektaş Demirci, B. (2022). Genelleştirilmiş 1-tipinden Gauss tasvirine sahip Minkowski uzayının yarı-Riemann alt manifoldlar, Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, 22(3), 536 551. (Tr dizin)

Kahraman Aksoyak, F., Bektaş Demirci, B., Babaarslan, M. (2023). Characterizations of Loxodromes on Rotational Surfaces in Euclidean 3-Space. International Electronic Journal of Geometry, 16(1), 147-159.

Kaymaz Özcanlı, A. (2023, 16 Nisan). A Comprehensive Review of Intelligent Islanding Detection Methods for Grid Integrated Distributed Generation Systems. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji. ID:1195562

Göksu, Ö. F., Gülbahçe, M. O., Düşmez, S. (2022). GaN Güç Anahtarları İle Gerçeklenen Yarım Köprü Geliştirme Kartının Isıl Başarımının İncelenmesi. Mühendislik Bilimleri ve Tasarım Dergisi, (Basım Aşamasında).

Türkmenoğlu, C., Uyar, A. Ş., Kiraz, B. (2022, Dec.). Fuzzy Inference Based A Posterior Decision-Making for Multi-Objective Diet Optimization Problem. Avrupa Bilim ve Teknoloji Dergisi, no. 45, pp. 41-47, Doi:10.31590/ejosat.1216648

Yıldızhan D., Erenoğlu A.K., Erdinç, O. (2022). Elektrikli Araç Entegrasyonunun Dağıtım Sistemine Etkilerinin İncelenmesi ve Şarj İstasyonu Altyapısının Tayin Edilmesi. Mühendislik Bilimleri ve Tasarım Dergisi, 9(1), (Kabul edildi).

Abbasoğlu, F., Gülcü, A., Başpınar, U. (2021). EEG Sinyallerinin Sınıflandırılmasında Evrimsel Öznitelik Seçim Metotlarının Kullanılması. International Journal of Advances in Engineering and Pure Sciences, Int. J. Adv. Eng. Pure Sci. 33 (2), 171-179, Doi: 10.7240/jeps.729478

Aram, K., Erdemir, G., Can, B. (2021). Açık Kaynak Kod Türkçe Doğal Dil İşleme Kütüphanelerinin Robotik Uygulamalarda Kullanımı. İstanbul Sabahattin Zaim Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 3 (2), 133-137. Doi: 10.47769/izufbed.880143 (Kontrol No:7049634)

Gülbahçe, M. O. & Karaaslan, M. E. (2021). Vektör Kontrollü Sürücüler için Asenkron Motor Eşdeğer Devre Parametrelerinin Üretici Veri Föylerinden Kestirilmesi. Mühendislik Bilimleri ve Tasarım Dergisi, 9 (4), 1372-138. DOI: 10.21923/jesd.953185

Gülcü, A., Alkan, M. (2021). Az Örnekle Öğrenme Problemleri için MAML ve ProtoNet Algoritmalarının İncelenmesi. Avrupa Bilim ve Teknoloji Dergisi, January, 21, 113-121. Doi: 10.31590/ejosat.834647

Nizam, A., Aydoğdu, İ. (2021, 30 Ocak). GraphQL için Sorgu Oluşturma Sürecinde Kullanılan Yöntemlerin Analizi ve İyileştirilmesi. International Journal of Advances in Engineering and Pure Sciences, 33 (1), 73-82. Doi: 10.7240/jeps.737786.

Emiroğlu, M. E., Edil, T. B., Kalkan, Y., Karadeniz, H., Celep, Z. (2020). Baraj Emniyeti için Gözlemsel İnceleme ve Değerlendirmelerin Rolü. Su Kaynakları, 5, (2), 40–47.

Gülcü, A., Alkan, M. (2020, 12 December). Az Örnekle Öğrenme Problemleri için MAML ve ProtoNet Algoritmalarının İncelenmesi. European Journal of Science and Technology, to appear- TR Dizin

Gürleyen, R., Akgül, T. (2020, Aralık). Bölünmüş İzge İşleme ile Video Devinim Büyütme. EMO Bilimsel Dergi10 (2).

Nizam, A., Aydoğdu, İ. E. (2020, 9 December). GraphQL için Sorgu Oluşturma Sürecinde Kullanılan Yöntemlerin Analizi ve İyileştirilmesi. International Journal of Advances in Engineering and Pure Sciences, to appear- TR Dizin

Özer, G. (2020, Ocak). Eklemeli Üretim Teknolojileri Üzerine Bir Derleme. NÖHÜ Müh. Bilim Dergisi.

Çalışkan, C. İ., Koç, E. (2019). Kuşevleri ve 3 Boyutlu Baskı Yöntemi ile Üretimi. FSMVÜ İlmi Araştırmalar Dergisi.

Gülcü, A., Kuş, Z. (2019, 17 June). Konvolüsyonel Sinir Ağlarında Hiper-Parametre Optimizasyonu Yöntemlerinin İncelenmesi. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, ULAKBİM TR.

Koca, A. (2018). Experimental examinatıon of heat transfer performance of the heated radiant wall system. Journal of Thermal Engineering, 4, 6, 2394-2407.

Yılmaz, F. (2018). Robotlar Hayatımızda. FSM İlmî Araştırmalar, İnsan ve Toplum Bilimleri Dergisi, 12, 109-120.

Celep, Z., Orak, M. S. (2017). Gedikbulak okul binasının sismik performansı hakkında. Teknik Dergi, İnşaat Mühendisleri Odası, 28 (2), 7889-7896.

Celep, Z., Özuygur, A. R. (2017). Yüksek binaların tasarımı. İnşaat Mühendisleri Odası, Bursa Bülten, 70, 8-12.

Kara, O., Erdal, H., Çelik, H. (2017). Non-Destructive Testing Methods: A Comparative Complitation Work. Marmara Fen Bilimleri Dergisi, 29, 82-93.

Yılmaz, F. (2016, Mart). Alüminyumda Geri Dönüşümün Artan Önemi. Alu&Art Dergisi, Özel Sayı, 1-3.

Nizam, A., Çimen, F. (2015). Türkoloji Çalışmaları İçin Sözlük-Dizin Oluşturmada Yeni Bir Bilgisayar Programı: dizici. FSM İlmî Araştırmalar İnsan ve Toplum Bilimleri Dergisi, sayı 6.

Akça, Y., Yılmaz, F., Koç, E. (2014, Şubat). Alüminyum Profil İmalatında İşçi Sağlığı ve İş Güvenliği. Metalurji Dergisi, 168, 27-34.

Börekçi, M., Kırçıl, M. S., Ekiz, İ. (2014). Evaluatıon of ınelastıc dısplacement ratıos of bılınear sdof systems. Journal of Engineering and Natural Sciences Mühendislik ve Fen Bilimleri Dergisi Sigma 32,189-199.

Yılmaz, F., Akça, Y. (2014, Şubat). Metal Endüstrisi, Alüminyum Ve Gelecek. Alu&Art Dergisi, 27, 192-195. 

Yılmaz, F., Arar, M. E., Koç, E. (2014, Şubat). 3D Baskı ile Hızlı Prototip ve Son Ürün Üretimi. Metalurji Dergisi, 168, 35-40.

Yılmaz, F. (2014, Eylül). Fatih Sultan Mehmet Dönemi Topları ve Değişen Üretim Paradigması. FSM İlmi Araştırmalar İnsan ve Toplum Bilimleri Dergisi, 4, 219-236.

Yılmaz, F. (2014, Kasım). İklim Değişikliği Gündemi Gerçeklerle Örtüşmelidir. Tesisat Dergisi, 227, 72-78.

Özkan, H., Tulum, G., Osman, O., Şahin, S. (2013, Kasım). BTA Görüntülerinde YSA ile Pulmoner Emboli Tespiti. TIPTEKNO, 13, 195-198.

Yılmaz, F. (2013). Marka ve Paradoks. Karabatak, sayı 8, 42-44.

Aksoylar, C., Omurtag, H. M. (2011). Fonksiyonel Derecelendirilmiş Plakların Karışık SEM ile Doğrusal Olmayan Statik Analizi. İTÜ dergisi/d. 

Nizam, A., Korürek, M. (2011). Karınca Koloni Optimizasyonuna Dayalı Yeni Bir Aritmi Sınıflama Tekniği. İTÜ Dergisi/D Mühendislik, 10, 1, 21-30.

Yılmaz, F. (2011). Rögarlar Şehir Kültürünü Simgeler. Marmara’da Birlik Dergisi, sayı 73, 50-53.

Çamurcu, A. Y., Demir, O. (2010). Lung Nodule Detection Using Template Matching and Similarity Measurement. 15th National Biomedical Engineering Meeting (BIYOMUT), 4.

Çamurcu, A. Y., Işık, M. (2010). “K-Means ve Aşırı Küresel C-Means Algoritmaları ile Belge Madenciliği. Marmara Üniversitesi, Fen Bilimleri Enstitüsü Dergisi, 22, 1-18.

Doğramacı Aksoylar, N., Öztürk, A. Z. (2010). Enerji Sönümlendiren Yarı Rijit Birleşimli Bir Çelik Çerçevenin Deprem Performansının Değerlendirilmesi. Yıldız Teknik Üniversitesi Sigma Mühendislik ve Fen Bilimleri Dergisi, 3, 28, 199-213.

Yılmaz, F. (2010). Küresel Gelişmeler ve Küresel Üniversiteler. Mimar ve Mühendis Dergisi, 38-41.

 

Uluslararası bilimsel toplantılarda sunulan ve bildiri kitaplarında (proceedings) basılan bildiriler

Karkazan, Kalthoum, Topcuoglu, H. R., Sahmoud, S. (2023, 12-14 April). A New Prediction-Based Algorithm for Dynamic Multi-objective Optimization Problems. Applications of Evolutionary Computation: 26th European Conference, EvoApplications 2023, Held as Part of EvoStar 2023, Brno, Czech Republic, Proceedings. Cham: Springer Nature, Switzerland.

Kuş, Z., Aydın, M., Kiraz, B., Can, B. (2023). Neural Architecture Search Using Metaheuristics for Automated Cell Segmentation. In: Di Gaspero, L., Festa, P., Nakib, A., Pavone, M. (eds) Metaheuristics. MIC 2022. Lecture Notes in Computer Science, vol 13838. Springer, Cham. https://doi.org/10.1007/978-3-031-26504-4_12

Arasteh, B., Fatolahzadeh, A., Kiani, F. (2022, May). Savalan: Multi objective and homogeneous method for software modules clustering. Invited paper, 30th IEEE/ACM International Conference on Program Comprehension (ICPC 2022) and ICSE 2022, PA, USA.

Aydın, M., Kiraz, B., Eren, F., Uysallı, Y., Morova, B., Özcan, S. C., Açılan, C., Kiraz, A. (2022, February). A Deep Learning Model for Automated Segmentation of Fluorescence Cell images. In Journal of Physics: Conference Series (Vol. 2191, No. 1, p. 012003). IOP Publishing.

Göncü, S., Erdagi, I.G., Silgu, M.A., Celikoglu, H.B. (05.06.2022-09.06.2022). Analysis on Effects of Driving Behavior on Freeway Traffic Flow: A Comparative Evaluation of Two Driver Profiles Using Two Car-Following Models. 33rd IEEE Intelligent Vehicle Symposium, Aachen, Germany,10.1109/IV51971.2022.9827296

Göncü, S., Silgu, M.A., Celikoglu, H.B. (05.06.2022-09.06.2022). Evaluation of Vehicle Assignment Algorithms for Autonomous Mobility on Demand Systems. 33rd IEEE Intelligent Vehicle Symposium, Aachen, Germany, 10.1109/IV51971.2022.9827456

Göncü, S., Silgu, M. A., Erdagi, I.G., Çelikoğlu, H. B. (20.02.2022-25.02.2022). Sensitivity Analysis for A Cooperative Adaptive Cruise Control Car Following Model: Preliminary Findings. 18th International Conference on Computer Aided Systems Theory, Las Palmas.

Göncü, S., Şahin, İ. (06.11.2022-10.11.2022). GPS-Based Incident Detection Algorithm for Two-Lane Bus Rapid Transit Systems: Case Study of Istanbul Metrobus. 15th Conference on Advanced Systems in Public Transport and TransitData (CASPT22), Tel Aviv, Israel.

Kanç, N. & Kiraz, B. (2022). Comparison of Multi-Parent Crossover Operators for Feature Selection. 2022 International Congress on Human-Computer Interaction, Optimization and Robotic Applications (HORA), pp. 1-10. Doi: 10.1109/HORA55278.2022.9799921.

Küçükarıkan, Y., Bektaş Demirci, B., Babaarslan, M. (1-3 Şubat 2022). On Bour's Theorem of Surfaces. Turkish Journal of Mathematics- Studies on Scientific Developments in Geometry, Algebra, and Applied Mathematics, Çevrimiçi Toplantı. 

Nizam, A. (2022, 7-9 Eylül). Testing Method for Detecting Data Inconsistencies in Model View Controller Architecture. ASYU 2022.

Sahmoud, S., Abdellatif, A., Ragheb, Y. (2022). A Fast Algorithm for Hunting State-Backed Twitter Trolls. International Conference on Pervasive Computing and Social Networking (ICPCSN 2022). (Accepted/In Press).

Sarı, A., Nizam, A., Aydın, M. (2022). Sinir Ağları ile Cilt Hastalıklarının Tanısında Transfer Öğrenme Yönteminin Uygulanması. 7. Uluslararası Bilgisayar Bilimleri ve Mühendisliği Konferansı, UBMK 2022.

Yılmaz, F. (3-4 Mart 2022). Yeni Normal ve Sınırda Karbon Düzenlemesi. Mühendislik Fakültesi ALUS’10, İstanbul Fuar Merkezi Yeşilköy. (Kitapçık basıldı)

Bulut, E. B., Gülbahçe, M. O., Kocabaş, D. A., Düşmez, S. (2021). Efficiency and Power Density Optimization of Three-Level Totem Pole PFC, PCIM Europe 2021.

Bulut, E. B., Gülbahçe, M. O., Kocabaş, D. A., Düşmez, S. (2021). Simplified Method to Analyze Drive Strengths for GaN Power Devices, PCIM Europe 2021.

Gülcü, A., Kuş, Z., Akkan, C. Slack-based Robustness Estimators for the Curriculum-Based Course Timetabling Problem. In Proceedings of the 13th International Conference on the Practice and Theory of Automated Timetabling- PATAT 2021: Volume I, (conference is postponed to 24-27 August 2021).

Gülcü, A., Tema, E. Y. (2021, 12-13 February). A Natural Language Processing Application: Analysis Of Four Basic Sentiments. In Proceedings of the Hodja Akhmet Yassawi 4th International Conference On Scientific Research, Ankara, Turkey.

Karayiğit, H., Yavaş, M. Ş. (2021, 13-15 October). Seismic performance assesment of existing bridge: fixed base system versus seismically isolated system. 6th International Conference on Earthquake Engineering and Seismology, Kocaeli, Turkey.

Koçak, T., Aydın, M., Kiraz, B. Empirical Comparison of Deep Neural Networks for Brain Vessel Segmentation. 2021 6th International Conference on Computer Science and Engineering (UBMK), (2021), pp. 751-756. Doi: 10.1109/UBMK52708.2021.9559015.

Lordoğlu, A., Gülbahçe, M. O., Kocabaş, D. A., Düşmez, S. (2021). Analytical Modelling and Optimization of Gapped Core Magnetics in LLC Converter, PCIM Europe 2021.

Lordoğlu, A., Gülbahçe, M. O., Kocabaş, D. A., Düşmez, S. (2021). System-Level Design Approach for LLC Converters, PCIM Europe 2021.

Özbay, B., Serhatlı, İ. E., Bulduk, M. E. (2021). Hollow Glass Microsphere and Glass Bead Polyamide 12 Composites Production by Selective Laser Sintering Method. IMMC’2021 International Metallurgy & Materials Congress, İstanbul, TÜRKİYE.

Öztürk, S., Bezir, F., Sarı, A. (2021, 2-3 Haziran). Atmosferik Depolama Tankları için Ampirik Sismik Kırılganlık Eğrileri. 9th Turkish Conference on Earthquake Engineering, Çevrimiçi Konferans.

Öztürk, S., Kayahan, A., Sarı, A. (2021, 12-16 July). Seismic Fragility and Behavior of Spherical Pressure Vessels. Proceedings of the ASME 2021 Pressure Vessels and Piping Conference PVP2021, Virtual, Online.

Yılmaz, F., Çayır, H. (2021, 4-5 February). Trenchless Technology Applications in Big Cities. I. Rumeli Energy and Design Symposium for Sustainable Environment, Istanbul, Turkey.

Yılmaz, F. (2021, 10-12 December). Heavy metals, environmental pollutıon and health. 7th Internatıonal Mardin Artuklu Scıentıfıc Researches Conference, Mardin, Turkey. (Online Sunum, Oturum Başkanlığı, Sunum basım aşamasında)

Zeybek, S., İsmail, A. H., Hartono, N., Caterino, M., Jiang, K. An Improved Vantage Point Bees Algorithm to Solve Combinatorial Optimization Problems from TSPLIB. Macromol. Symp (2021). 396, 2000299. Doi: https://doi.org/10.1002/masy.202000299

Zeybek, S., İsmail, A. H., Hartono, N., Caterino, M., Jiang, K. Combinatorial Bees Algorithm for Vehicle Routing Problem. Macromol. Symp (2021). 396, 2000284. Doi:https://doi.org/10.1002/masy.202000284

Gülcü, A., Kuş, Z., Akkan, C. (2020, 19-24 July). Search Space Sampling by Simulated Annealing for Identifying Robust Solutions in Course Timetabling. In Proceedings of IEEE World Congress On Computational Intelligence (WCCI), Glasgow (UK).

Kavas, A., Köse, U. Design and Performance Analysis of Split Ring Resonator Based Microstrip Antenna With Defected Ground Structure. 2020 4th International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT) (2020). Istanbul, Turkey, pp. 1-4. Doi: 10.1109/ISMSIT50672.2020.9255275

Kiraz, B., Bidgoli, A. A., Ebrahimpour-komleh, H., Rahnamayan, S. A Novel Collective Crossover Operator for Genetic Algorithms. 2020 IEEE International Conference on Systems, Man and Cybernetics (SMC) (2020). Toronto, ON, pp. 4204-4209. Doi: 10.1109/SMC42975.2020.9282841.

Kiraz, B., Dasdemir, A. O., Koral, A. K., Kiraz, A., Magden, E. S. Multi-Scale Hierarchical Topology Optimization for Nanophotonic Design. In OSA Advanced Photonics Congress (AP) 2020 (IPR, NP, NOMA, Networks, PVLED, PSC, SPPCom, SOF). Caspani, L., Tauke-Pedretti, A., Leo, F., Yang, B., OSA Technical Digest (Optical Society of America, 2020). Paper ITu4A.11.

Sahmoud, S., Hala, F., Abdul-Jabbar Jassim, M. (2020). A Robust Iris Segmentation Algorithm Based on Pupil Region for Visible Wavelength Environments. 3rd ISRITI 2020 conference. (To be appear)

Sahmoud, S., Hala, F. (2020). Fast Iris Segmentation Algorithm for Visible Wavelength Images Based on Multi-color Space. International Conference on Advanced Concepts for Intelligent Vision Systems. Springer, Cham.

Sahmoud, S., Hayder, S. (2020). Detecting Suspicious Activities of Digital Trolls During the Political Crisis. 2020 IEEE International Conference on Informatics, IoT, and Enabling Technologies (ICIoT), IEEE.

Sahmoud, S., Rahmi Topcuoğlu, H. (2020). Memory-Assisted Dynamic Multi-Objective Evolutionary Algorithm for Feature Drift Problem. 2020 IEEE Congress on Evolutionary Computation (CEC), IEEE.

Tatar, G. (2020, 7-9 Eylül). LabVIEW FPGA Based BLDC Motor Control by Using Field Oriented Control Algorithm. 2020 International Conference on Smart Energy Systems and Technologies (SEST), Publisher: IEEE, Conference Location: Istanbul Turkey.

Tuna, S., Güleç, Ç., Yücesan, E., Çırakoğlu, A., Tarkan Argüden, Y. (2020). Nörodejeneratif Hastalıkların Ayırıcı Tanısında Çok Boyutlu Veri Analizi Yaklaşımının mTOR Yolağı Aracılığı ile Değerlendirilmesi. 56. Ulusal Nöroloji Kongresi.

Yavaş, M. Ş., Yavaş, Z., Teloğlu, A. (2020, 26-27 November). Adobe buildings: Earthquake resistance and their application in Turkey. 8th International Conference KERPIC’20, Istanbul.

Zeybek, S., Pham, D. T., İsmail, A. H., Hartono, N. Using the Bees Algorithm to solve combinatorial optimisation problems for TSPLIB. In IOP Conference Series: Materials Science and Engineering Vol. 847 (2020). Institute of Physics Publishing. Doi: https://doi.org/10.1088/1757-899X/847/1/012027

Celep, Z., Aksoylar, C. (2019, 8-11 Ekim). On seismic load reduction factor of mixed structures. International Conference on Earthquake Engineering and Seismology (5ICEES), Ankara.

Celep, Z., Güler, K. (2019, 7-9 October). On the general requirements for design of earthquake resistant buildings in the Turkish Building Seismic Code of 2018. The 4th International Conference on Buildings, Construction and Environmental Engineering (BCEE4-2019), İstanbul.

Celep, Z., Özuygur, A. R., Dilsiz, A. (2019, 8-11 Ekim). On seismic soil-structure interaction in the pile foundations as given in the Turkish Building Seismic Code. 5th International Conference on Earthquake Engineering and Seismology (5ICEES), Ankara.

Celep, Z., Yavaş, M. Ş., Teloğlu, A. N. (2019, 8-11 Ekim). On the vertical seismic effect in the structural systems of buildings as given in the given in the Turkish Building Seismic Code. 5th International Conference on Earthquake Engineering and Seismology (5ICEES), Ankara.

Çamurcu, A. Y., Nizam, A., Büyük, O. O., Akgül, E. M. (2019). A Novel Money Teaching Method for Autism Spectrum Disorder Children Using Computer-Enhanced Techniques. ERPA 2019, Sakarya.

Demirci, B. B. (2019, 19-22 Haziran). On Generalization of Pointwise 1-Type Gauss Map. 17th International Geometry Symposium, Erzincan Binali Yıldırım Üniversitesi, Erzincan.

Gülcü, A., Kuş, Z., Akkan, C. (2019, June). Minimum Penalty Perturbation Heuristics for Curriculum-based Timetables Subject to Multiple Disruptions. 30th European Conference On Operational Research (euro2019), 23- 26 Dublin, Ireland.

Koca, A., Mansour, N. K. (2019). Numerical Simulation of Annular Flow boiling in Millimeter-scale Channels and Investigation of Design Parameters Using Taguchi Method. International Conference on Science and Technology ICONST2019, Prizren, Kosova.

Mert, M., Özkan, T. (2019, 4-5 June). Settlement Analysis of Axially Loaded Bored Piles: A Case History. Proc. 21st International Conference on Soil Mechanics and Geotechnical Engineering, New York, USA.

Özbay, B., Özer, G., Bulduk, M. E., Tarakçı, G., Öter, Z. Ç., Koç, E. (2019). Production of PRIMECAST® Polystyrene by Selective Laser Sintering (SLS) Method and Development of Surface Roughness of Sintered Parts. Additive Manufacturing Conference (AMC TURKEY), İstanbul, TÜRKİYE.

Özbay, B., Serhatlı, İ. E., Bulduk, M. E. (2019). Manufacturing and Characterization of Filled Polyamide 12 Composite Structure By Selective Laser Sintering Method. 5th Edition of International Conference on Polymer Science and Technology. Berlin, ALMANYA.

Özhan, O. (2019, 20 Mart). A Portable Wearable Tele-ECG Monitoring System. IEEE Transactions on Instrumentation and Measurement.

Öztürk, S., Bezir, F., Sarı, A. (2019, 8-11 Ekim). Atmosferik Depolama Tankların Deprem Riski ve Kırılganlık Eğrileri. 5. International Conference on Earthquake Engineering and Seismology, ODTÜ, Ankara.

Tatar, G., Bayar, S., Alkan, M. FPGA Based Step Motor Control For Solar Panels. 2019 IEEE 13th International Conference on Application of Information and Communication Technologies (AICT) (2019). Bakü, Azerbaijan, pp. 1-5, Doi: 10.1109/AICT47866.2019.8981722. 

Tatar, G., Kılıç, O., Bayar, S. FPGA Based Fault Distance Detection and Positioning of Underground Energy Cable by Using GSM/GPRS. 2019 International Symposium on Advanced Electrical and Communication Technologies (ISAECT) (2019). Rome, Italy, pp. 1-6, Doi: 10.1109/ISAECT47714.2019.9069726.

Yılmaz, F., Çayır, H. (2019, 13-15 Haziran). Doğumunun 1046. Yılında Birûni: Kıymetli Taşlar Ve Metaller Araştırması. I. Uluslararası Prof. Dr. Fuat Sezgin İslam Bilim Tarihi Sempozyumu, İstanbul, Türkiye.

Yılmaz, F., Göncü, S. (2019, 2-4 Mayıs). Yerküremiz Kaynaklarının Kullanımı, Refah ve Türkiye. Uluslararası Mühendislik Doğal Bilimler Ve Mimarlık Sempozyumu, Kocaeli, Türkiye.

Yılmaz, F., Göncü, S. (2019, 10-11 Ekim). Yerküremiz Kaynaklarının Kullanımı, Sürdürülebilirlik ve Alüminyum. 9.Uluslararası Alüminyum Sempozyumu, İstanbul, Türkiye.

Alkan, M., Aydın, M. (2018). Simulation and Comparison of Pathfinding Algorithms using Real Turkey Data. International Conference on Artificial Intelligence and Data Processing (IDAP 2018), Malatya, Türkiye.

Aydın, M., Kiraz, B., Kiraz, A., Doğan, B. (2018, 25-27 October). Digital Holograms obtained using Advanced Evolution Strategy. 6th International Conference on Control Engineering & Information Technology CEIT 2018.

Celep, Z., Emiroğlu, M. E., Edil, T. B., Kalkan, Y., Karadeniz, H. (2018, 27 October – 1 November). Baraj emniyeti için gözlemsel inceleme ve değerlendirmelerin rolü. 5. Uluslararası Baraj Güvenliği Sempozyumu, (5th International Symposium on Dam Safety and Exibition), Orhantepe, İstanbul.

Çamurcu, A. Y., Güven, E. Y. (2018). Akıllı Nesneler için Fiziksel Saldırı Tespiti. International Conference on Artificial Intelligence and Data Processing, IEEE (IDAP 2018).

Çamurcu, A. Y., Büyük, O. O. (2018). A Novel Actual Time Cyber Security Approach to Smart Grids. 6. International Istanbul Smart Gids and Cities Conference and Fair, IEEE, (Tam Metin Bildiri/Poster) Yayın No:4272594.

Çamurcu, A. Y., Güven, E. Y. (2018). Edge Computing Security Application: Kılıç. Uluslararası Bilgisayar Bilimleri ve Mühendisliği Konferansı, IEEE (UBMK 2018).

Göksu, O. F., Acar Vural, R. (2018). Battery Management Module with Active Balancing and Cell Switching. 2018 6th International Conference on Control Engineering & Information Technology (CEIT), pp. 1-6, İstanbul, Turkey.

Öter, Z. Ç., Koç, E., Coşkun, M. (2018). Improvement of Surface Quality and Precision of DMLS Parts With Fine Geometric Details. Euro PM2018 Congress & Exhibition.

Söylemez, E., Koç, E., Coşkun, M. (2018). Selective laser melting process simulation of AlSi10Mg alloy to predict part distortions. Uluslararası Makina Tasarım ve İmalat Kongresi-UMTIK.

Tatar, G., Bayar, S. (2018, 21-23 Nov). FPGA Based Bluetooth Controlled Land Vehicle. 2018 International Symposium on Advanced Electrical and Communication Technologies (ISAECT), IEEE, Rabat Morocco, Morocco.

Ulus, A., İpek, S. K., Ekici, H., Öter, Z. Ç., Koç, E. (2018). Investigation of Elemental Distribution in the Sheet Sections after Aluminum Continuous Sheet Casting, Cold Rolling and Heat Treatment Processes. TMS 2018 (147th Annual Meeting & Exhibition of the Minerals, Metals, and Materials Society).

Celep, Z., Ahunbay, Z., Altay, G., Arun, G., Aydemir, O., Atasagun, F. D., Altuğ Erberik, M., İlki, A., Kuran, F., Ünal, Z. G., Aköz, F., Olgun, N., Şimşek, M., Kaya, Y., Uçar, Y. (2017, 11-13 October). A guideline for earthquake risk management of historical structures in Turkey. 4. International Conference Earthquake Engineering and Seismology, Anadolu University, Eskişehir.

Celep, Z., Ahunbay, Z., Altay, G., Arun, G., Aydemir, O., Atasagun, F. D., Altuğ Erberik, M., İlki, A., Kuran, F., Ünal, Z. G., Aköz, F., Olgun, N., Şimşek, M., Kaya, Y., Uçar, Y. (2017, 12-15 July). Preparation of a guideline for earthquake risk management of historical structures in Turkey. 3rd International Conference on Protection of Historical Constructions, Lisbon, Portugal.

Celep, Z., Ahunbay, Z., Altay, G., Arun, G., Aydemir, O., Atasagun, F. D., Altuğ Erberik, M., İlki, A., Kuran, F., Ünal, Z. G., Aköz, F., Olgun, N., Şimşek, M., Kaya, Y., Uçar, Y. (2017, 2-4 Kasım). The Turkish guideline for earthquake risk management of historical structures, Uluslararası Katılımlı. 6. Tarihi Yapıların Korunması ve Güçlendirilmesi Sempozyumu, Trabzon.

Hüsem, S. Ş., Gülcü, A. Veri Madenciliği Teknikleriyle Türkçe Web Sayfalarının Kategorize Edilmesi. Uluslararası Bilgisayar Bilimleri Ve Mühendisliği Konferansı (UBMK 2017) s. 255-260, Antalya, Türkiye.

Öztürk, S., Doran, B., Aksoylar, C. (2017, 8-10 Mayıs). An Analytical and Experimental Study of Time Integration Methods in Pseudo Dynamic Analysis. 2nd International Conference on Civil and Environmental Engineering, Nevşehir, Avanos.

Celep, Z., Orak, M. S., Öztürk, T. (2016, 21-23 September). On seismic design of connections of reinforced concrete slabs to reinforced concrete structural walls. 12th International Congress on Advances in Civil Engineering, İstanbul.

Celep, Z., Orak, M. S. (2016, 21-23 September). Seismic behavior of reinforced columns strengthened by steel plates. 12th International Congress on Advances in Civil Engineering, İstanbul.

Celep, Z., Yapıcı, O., Şahin, H. (2016, 24-28 October). On modelling of shear walls in linear and nonlinear analysis of structural systems. International Congress on Advanced Earthquake Resistant Structures (AERS 2016), On dokuz Mayıs University, Samsun.

Özkan, H., Berg, B., Cortazar, B., Tseng, D., Feng, S., Wei, Q., Chan, R. Y., Burbano, J., Farooqui, Q., Lewinski, M., Di Carlo, D., Garner, O. B., Özcan, A. Cellphone-based hand-held microplate reader for point-of-care ELISA testing. (Conference Presentation), Proc. SPIE 9699. Optics and Biophotonics in Low-Resource Settings II (2016, 3 May), 969905. Doi:10.1117/12.2209125. 

Yeleğen, M. Ö., Uyumaz, A. (2016, 30-31 March). Flow Velocity Effect on Clear Water Bridge Pier Scour. World Congress on Civil, Structural and Environmental Engineering, Prague, Czech Republic (Best Paper Award).

Celep, Z., Baş, S., Apaydın, N. (2015, 25-29 August). Seismic performance assessment of approach viaducts of Bosporus Bridge. Second European Conference on Earthquake Engineering and Seismology (2ECEES), İstanbul.

Celep, Z., Tetik, T. (2015, 20-23 May). Structural performance of Sheikh Suleiman Masjid and its strengthening. International Conference on Civil and Environmental Engineering, Cappadocia.

Özkan, H., Feizi, A., Greenbaum, A., Chan Y., Berg, B., Zhang, Y., Chung, P., Wu M. Özcan, A. (2015, 22-24 June). Portable and Cost-effective Cell Viability Analysis Using Lensfree On-Chip Imaging. 16th Annual UC Systemwide Bioengineering Symposium, University of California, Santa Cruz, CA, USA.

Özkan, H., Weı, Q., Luo, W., Hıang, S., Kappel, T., Mejıa, C., Tseng, D., Chan, R. Y. L., Yan, E., Qı, H., Shabbır, F., Fengs, S., Özcan, A. (2015). Field-Portable Smartphone Microscopy Platform fo Wide-field Imaging and Sizing of Single DNA molecules. CLEO: Applications and Technology, Optical Society of America.

Yılmaz, F., Koç, E., Akça, Y. (2015, 8 Ekim). Alüminyum Endüstrisinde Enerji Verimliliği ve Sera Gazları. Alu Expo 2015 Kongresi, İstanbul Fuar Merkezi, Tebliğ Sunumu.

Yılmaz, F. (2015, 8 Ekim). Metalik Malzemelerin 500 Yıllık Serüveni ve Değişen Üretim Paradigması. Alu Expo 2015 Kongresi, İstanbul Fuar Merkezi, Tebliğ Sunumu.

Yılmaz, F. (2015, 9 Ekim). Su İletiminde Kullanılan Boruların Tarihsel Gelişimi ve Alternatifler. 1. Türk Kompozit 2015 Zirvesi, İstanbul, Tebliğ Sunumu.

Yeleğen, M. Ö., Uyumaz, A. (2015, 20-23 May). Equilibrium Scour Depth Calculation With Artifıcial Neural Networks (ANN). International Conference on Civil and Environmental Engineering, Cappadocia, Turkey. 

Yılmaz, F., Arınç, Ü. D. (2015, 18-20 May). Installation of Remote Monitoring System for the Natural Gas Reducing and Metering Distribution Station (RMS-B) by Supplying Power” via Photovoltaic Solar Panels. Energy Economy & Energy Management Forum for MENA, Amman-Jordan.

Yılmaz, F. (2015, 30 Nisan). Trenchless Technology (TT) In Smart Cities. ICSG 2015.

Zeybek, S., Koç, E. The vantage point bees algorithm. In IJCCI 2015- Proceedings of the 7th International Joint Conference on Computational Intelligence (2015), vol. 1, pp. 340–345.

Özhan, O., Arar, M. E., Güçlü, B., Özkan, M. (2014, 18-20 June). Design of a Computer-Controlled Current Stimulator for Nerve and Muscle Excitation. 2014 International Symposium on Innovative Technologies in Engineering and Science (ISITES 2014), Karabük.

Sarıca, F., Morgül, A. (2014, 20-21 March). Multilevel Sequential Logic Circuit Design. 2014 International Conference on Circuits and Systems (ICOCS 2014), Manila, Philippines.

Yılmaz, F., Koç, E., Tekkeşin, M. (2014, 11-13 Eylül). Production Of Metallic Parts By Additive Manufacturing. 17.Uluslararası Metalurji ve Malzeme Kongresi (IMMC 2014).

Özkan, H., Osman, O., Şahin, S. Computer Aided Detection of Pulmonary Embolism in Computer Tomography Angiography Images. IEEE Conference on Electronics, Computer and Computation (7-8 November 2013), 359-362, Ankara. Doi: http://dx.doi.org/10.1109/ICECCO.2013.6718301.

Yılmaz, F., Cömert, H. (2011, 27-29 Mayıs). Üniversitelerde Değişim ve Yeni Gerçeklik. Uluslararası Yükseköğretim Kongresi: Yeni Yönelişler ve Sorunlar (UYK-2011), İstanbul.

Yılmaz, F., Güleç, A., Torun, Y. (2011, 2-5 Mayıs). The Current Trenchless Experiences and Rehabilitation Needs of Sewer System in Istanbul. No Dig International Conference, Berlin.

Doğramacı Aksoylar, N., Elnashaı, S. A. (2010, 30 Ağustos- 3 Eylül). Seismic Response of A Semi-Rigid Moment Resisting Frame under Far and Near Field Records. 14th European Conference on Earthquake Engineering, Ohrid, Macedonia.

Doğramacı Aksoylar, N., Elnashaı, S. A., Öztürk, A. Z. (2010, 21-24 Eylül). Moment Capacity of Extended End Plate Connections According to AISC and EUROCODE. Steel Structures: Culture & Sustainability 2010, İstanbul, Türkiye.

Yılmaz, F., Güleç, A., Türk, A., Üstel, F. (2010, 5-7 July). Comparison of Corrosion Performance of Zn and Zn/Al 85/15 Coatings Which were Produced By TWEA. 6th. International Conference on Diffusion in Solids and Liquids (DSL-2010), Paris, France.

 

Ulusal bilimsel toplantılarda sunulan ve bildiri kitaplarında basılan bildiriler

Çayır, H., Vatansever, C., Yavaş, M. Ş., Celep, Z. (7-9 Kasım 2022). Eksenel Basınç Etkisindeki Çelik Elemanların Davranışında Geometrik Önkusurlar ve Artık Gerilmelerin Önemi. Türkiye İnşaat Mühendisliği 18. Teknik Kongre ve Sergisi, İstanbul.

Macur, E., Kiraz, B. (2022). Opposition Based Binary Particle Swarm Optimization Algorithm for Feature Selection. 2022 Innovations in Intelligent Systems and Applications Conference (ASYU), pp. 1-6, doi: 10.1109/ASYU56188.2022.9925378.

Öztürk, S., Sarı, A. (7-9 Kasım 2022). Küresel Depolama Tanklarının Yakın Fay Yer Hareketlerinde Sismik Davranışları. Türkiye İnşaat Mühendisliği 18. Teknik Kongre ve Sergisi, İstanbul.

Yılmaz, F. (2022, 26 Mayıs).  Karbonsuz Ekonomi ve Sınırda Karbon Düzenlemesi, Yeşil Metaller ve Alüminyum.  ALUTEAM, İstanbul.

Alkan, M., Kiraz, B., Eren, F., Uysallı, Y., Kiraz, A. (2021, Haziran). Few-Shot Learning for Segmentation of Yeast Cell Microscopy Images. 2021 29th Signal Processing and Communications Applications Conference (SIU), pp. 1-4. Doi: 10.1109/SIU53274.2021.9477988.

Aydın, M. (2021, Haziran). Medical Image Segmentation Using Deep Neural Networks. 2021 29th Signal Processing and Communications Applications Conference (SIU), pp. 1-4, Doi: 10.1109/SIU53274.2021.9477838.

Aram, K., Can, B., Erdemir, G. (2020). Açık Kaynak Türkçe Doğal Dil İşleme Kütüphanelerinin Robotik Uygulamalarda Kullanımı. Ulusal Açık Kaynak ve Özgür Yazılım Konferansı (UAKK 2020).

Aydın, M., Kiraz, B., Uysallı, Y., Özgönül, E., Morova, B. (2020). Sinüzoidal Aydınlatma Desenleri Kullanılarak Frekans Uzayında Görüntü Yeniden Yapılandırma. (In: Signal Processing and Communication Application Conference (SIU), IEEE.

Tuna, S., Güleç, C., Yücesan, E., Çırakoğlu, A., Tarkan Argüden, Y. (2020). Nörodejeneratif Hastalıkların Ayırıcı Tanısında Çok Boyutlu Veri Analizi Yaklaşımının mTOR Yolağı Aracılığı ile Değerlendirilmesi. 56. Ulusal Nöroloji Kongresi.

Bektaş Demirci, B., Aghayev, N. (2019, 28-29 Haziran). Quaternionlar Yardımıyla Yansıma ve Dik İzdüşüm Dönüşümleri. 14. Ankara Matematik Günleri Sempozyumu, Gazi Üniversitesi, Ankara.

Bektaş Demirci, B., Turgay, N. C. (2019, 31 Ağustos-3 Eylül). Yarı-Riemann Uzay Formlarının Pozitif Göreceli Hiçliğe Sahip Yarı Minimal Alt Manifoldları Üzerine. 32. Ulusal Matematik Sempozyumu, Samsun.

Çamurcu, A. Y., Nizam, A., Büyük, O. O., Akgül, E. M. (2019). A Novel Money Teaching Method for Autism Spectrum Disorder Children Using Computer-Enhanced Techniques, ERPA 2019, Sakarya.

Göncü, S., Şahin, İ. (2019, 10-12 Ekim). İstanbul Metrobüs Koridorundaki Trafik Akımlarının GPS Verilerinden Yararlanılarak İncelenmesi. TMMOB İnşaat Mühendisleri Odası 13. Ulaştırma Kongresi, Erzurum, Türkiye.

Gülcü, A., Başpınar, U., Abbasoğlu, F. (2019, 24-26 Nisan). Öznitelik Çıkarım Ve Evrimsel Öznitelik Seçim Metotlarının EEG Sinyallerinin Sınıflandırma Başarısına Etkileri. 27. Sinyal İşleme ve İletişim Uygulamaları Kurultayı (SİU), Sivas, Türkiye.

Gülcü, A., Kuş, Z. (2019, 24-28 Haziran). Mikrokanonikal optimizasyon algoritması ile konvonsüyonel sinir ağlarında hyper-parametrelerin optimize edilmesi. Kuzeybatıda Yapay Öğrenme Yaz Okulu 2019, İstanbul, Türkiye.

Köse, U., Ekmekçi, E. (2018, Eylül). Metamalzeme Tabanlı Soğurucu Yüzeylerde Soğurma Miktarının Dielektrik Malzeme Özelliğine Göre Nümerik Olarak İncelenmesi. 9. URSI-Türkiye Bilimsel Kongresi, Konya.

Celep, Z., Güler, K., Sert, Ö. F., Baykan, A., Türk, G. (2017, 5-6 Ekim). İstanbul, Eminönü’nde bulunan Rüstem Paşa Camii’nde yapılan yapısal müdahaleler. Tarihi Yapılarda Deprem Risklerinin Yönetimi Uluslararası Sempozyumu, Vakıflar Genel Müdürlüğü, İstanbul.

Celep, Z. Deprem Yönetmeliği'nde betonarme yapılar konusunda muhtemel değişiklikler. İMO İstanbul Bülten (2016), 137, 21-22.

Celep, Z. Deprem Yönetmeliği'nde betonarme yapılar konusunda muhtemel değişiklikler. Türkiye Mühendislik Haberleri (2016), 61, 2016-4, 492, 30-40.

Özkan, H., Kayhan, O. S. Adeno-Rota Virüs Testlerinin Tablet Bilgisayar Aracılığıyla Sonuçlandırılması. Electric Electronics, Computer Science, Biomedical Engineerings Meeting (EBBT) (2016), Istanbul, Turkey, pp 1-3, Doi: 10.1109/EBBT.2016.7483695.

Özkan, H., Kayhan, O. S. (2016). Bilgisayar Tabanlı Otomatik Adeno-Rota Virüs Hızlı Hastalık Teşhis Testlerinin Sonuçlandırılması. 1. Ulusal Biyomedikal Cihaz Tasarımı ve Üretimi Sempozyumu (UBİCTÜS 2016), İstanbul, Türkiye. 

Aksoylar, C., Doğramacı Aksoylar, N., Güzel, Ö., Koç, E. (2015, 24-28 Ağustos). Tek Katlı Tek Açıklıklı Düzlem Çerçevenin Hibrit Dinamik Benzeri Testi. 19. Ulusal Mekanik Kongresi (UMK), Trabzon, Türkiye.

Börekçi, M., Kırçıl, S., Ekiz, İ. (2015, 11-14 Mayıs). Dayanım Ve Rijitlik Azalmasının TSD Sistemlerin Elastik Ötesi Yerdeğiştirme Sabiti Üzerine Etkisi. Sekizinci Ulusal Deprem Mühendisliği Konferansı, İstanbul.

Kayhan, O. S., Bagbaba, A. C., Ors, B., Erozan, A. T. JPEG image Encryption via TEA algorithm. Signal Processing and Communications Applications Conference (SIU) (2015, 16-19 May), pp.2090-2093.

Özbay, B., Bekem, A., Ünal, A. (2015). Melez İplikli Termoplastik Kompozitlerin Elyaf Sarma Yöntemiyle Üretim ve Karakterizasyonu. KompEGE III Konferansı, İzmir, TÜRKİYE.

Özkan, H., Ergin, T., Osman, O., Dandin, Ö., Teomete, U., Tulum, G. (2015, Ekim). Travmatik Dalak Yaralanmalarının Tespitinde Tele-Tıp Uygulaması. Tıptekno, Bodrum, Türkiye.

Yapıcı, O., Karaman, E., Öztürk, S., Doğramacı Aksoylar, N., Aksoylar, C. (2015, 24-28 Ağustos). Düzlem Çubuk Eleman Rijitlik Matrisinin Deneysel Olarak Belirlenmesi. 19. Ulusal Mekanik Kongresi (UMK 2015), Trabzon, Türkiye.

Arar, M. E., Güçlü, B., Özkan, M. (2014, 16-17 Ekim). Elektriksel Uyaran Tasarımı ve Somatosensoriyel Uyarılmış Potansiyeller (SUP). 18. Biyomedikal Mühendisliği Ulusal Toplantısı (BİYOMUT 2014), Boğaziçi Üniversitesi, İstanbul, Türkiye.

Özkan, H., Tulum, G., Osman, O., Şahin, S. Pulmoner Emboli Veri Setinde Özellik İndirgeme. TIPTEKNO (2014, Eylül), 198-201, Kapadokya, Türkiye.

Yılmaz, F. (2014, 5-7 Mayıs). İnovasyon Nanoteknoloji ve Sağlık. VII. Uluslararası İş Sağlığı ve Güvenliği Konferansı, İstanbul, Türkiye.

Düzgün, A., Çakırer Özservet, Y. (2013, 7-8 Kasım). İstanbul’da Obezite Engeli Olan Bireylerin Mekânsal Hareketlilik Haritalarını Ortaya Çıkarmak. I. Ulusal “Engellileştirilenler” Sempozyumu, Ulaşılabilir Kentler Engelsiz Mekanlar (UKEM) Hareketi, Selçuk Üniversitesi Mimarlık Bölümü, Konya, Türkiye.

Nizam, A., Dilmaç, S., Korurek, M. (2013, Haziran). Modified Artificial Bee Colony Algorithm Based ECG Beat Type Classification Method, Comparison with ACO Based Classifier. ISITES2013, Sakarya, Türkiye.

Özkan, H., Tulum, G., Osman, O., Şahin, S. BTA Görüntülerinde YSA ile Pulmoner Emboli Tespiti. TIPTEKNO (2013, 13 Kasım), 195-198, Antalya, Türkiye.

Uyumaz, A., Yeleğen, M. Ö. (2013, 22-24 Mart). Köprü Ayaklarında Oluşan Oyulmalar İçin Bulanık Mantık Modeli. 3. Uluslararası Bursa Su Kongresi ve Sergisi, Bursa, Türkiye.

Yılmaz, F., Çakırer Özservet, Y. (2013, 7-8 Kasım). Yerelden Engelsiz Tasarım Uygulamaları. Küçükçekmece Belediyesi Örneği, I. Ulusal “Engellileştirilenler” Sempozyumu, Ulaşılabilir Kentler Engelsiz Mekânlar (UKEM) Hareketi, Selçuk Üniversitesi Mimarlık Bölümü, Konya, Türkiye.

Özkan, H., Osman, O., Şahin, S. Bilgisayarlı Tomografi Anjiyografi Görüntülerinde Pulmoner Emboli Tespiti. TIPTEKNO 2012 (2012, 12 Kasım), 49-53, Antalya, Türkiye.

Aksoylar, C., Omurtag, M. H. (2011, 5-9 Eylül). Fonksiyonel Derecelendirilmiş Plakların Karışık SEM ile Analizi. XVII. Ulusal Mekanik Kongresi.

Celep, Z., Baş, S., Apaydın, N. M. (2011). İstanbul Boğaziçi Köprüsü Yaklaşım Viyadüklerinin Dinamik Davranışının İncelenmesi ve Deprem Performansının Belirlenmesi. 2. Köprüler ve Viyadükler Sempozyumu, Eskişehir.

Yılmaz, F. (2010, 17 Ağustos). Depremin Altyapılara Etkileri, Altyapıların Yönetimi ve Kazısız Teknolojiler Çalıştayı’nda panel başkanlığı ve sunum. İGDAŞ Konferans Salonu.

 

Diğer Yayınlar

Celep, Z. (2023, Nisan-Mayıs). Yaşamak tesadüf değil. EQ Dergi. 108. Doi:  https://eqdergi.com/eq108/yasamak-tesaduf-degil/ 

Yılmaz, F. (2023, 18 Mart). Tahıllar ve Tahıl Koridoru Anlaşması. N.B. EKONOMİM Gazetesi.

Yılmaz, F. (2023, 4 Mart). Malzeme Ayakizi ve Beton Yıkıntı Atıkları. N.B. EKONOMİM Gazetesi.

Yılmaz, F. (2022). Lityum Madenciliği, Bataryalar, Elektrikli Araçlar ve TOGG. Enerji ve Çevre Dünyası, Kasım-Aralık, 178, 30-38.

Yılmaz, F. (2022, 24 Mayıs). Yeşil Metaller ve Gelişmeler. Dünya Gazetesi.

Çiftçi, F., S. A. (2021). Designing and 3D Printed PLA Based Implant Used in Treatment for Unilateral Vocal Cord Paralysis. International Journal of 3D Printing Technologies and Digital Industry, 416-425. Doi:https://doi.org/10.46519/ij3dptdi.1003044.

Yılmaz, F. (2021, 1 Temmuz). Partiküller, Hava Kirliliği ve Sağlık. Enerji ve Çevre Dünyası Dergisi.

Yılmaz, F. (2020, Kasım-Aralık). Öne Çıkan Meslekler ve Yeni Alanlar. Mimar ve Mühendis Dergisi, s. 64-69.

Gündoğar, Z. (2019, 1-5 March). Statistics Rooted Decomposition Method: Tridiagonal Folmat Enhanced Multivariance Products Representation, Workshop on Low-rank Optimization and Applications. Max Planck Institute for Mathematics in the Sciences, Leibzig, Germany. (Poster presentation)

Yılmaz, F. (2019). Fuat Sezgin’i Anma ve Müslümanların Bilime Katkılarını Anlama. Şehir ve Kültür Dergisi, 61, s. 46-48.

Yılmaz, F. (2019, Ocak-Şubat). Nasıl Bir Üniversite Hangi Sorumluluklar, Üniversitelerimiz ve Bilimsel Çalışmalar. Mimar ve Mühendis Dergisi, sayı 105, s. 64-68.

Harmanşa, B. E., Kiraz, B., Kurt, A., Kiraz, A. (2018, 15-16 Aralık). Konfokal Mikroskop Bilgisayar Denetimcisi. 23. Biyomedikal Bilim ve Teknoloji Sempozyumu (BİOMED 2018).

Yılmaz, F. (2016). Elektrikli Araçlar ve Alüminyum. ALU&Art, 42, 60-62.

Yılmaz, F., Aksoylar, C. (2015, Temmuz-Ağustos). Üniversitelere ve Teknik Öğretime Eleştirel Bakış. Mimar ve Mühendis Dergisi, sayı 84.

Yılmaz F. (2015, Şubat-Mart). İklim Değişikliği Gündemi Alüminyum Endüstrimize Ne Getiriyor? ALU&Art Dergisi, sayı 33.

Yılmaz, F. (2015, 4 Mart). Şehir Kültürü ve Cadde Peyzajı. İTÜ İnşaat Fakültesi, Seminer.

Y. Morgül, A., Sarıca, F. (2014, December). Multilevel Sequential Logic Circuit Design. International Journal of Electronics and Electrical engineering (IJEEE), Vol:2 No:4, pp:254-258 (ISSN 2301-380X, available online).​

Yılmaz, F. (2013, 3 Ekim). Küresel Gelişmeler ve Üretim Sanayisi. Alus’06.

Yılmaz, F. (2011, 14 Mayıs). Altyapı Uygulamalarında Devrim: Kazısız Teknolojiler.

 

Yazılan ulusal/uluslararası kitaplar veya kitaplardaki bölümler

Kiani, F., Seyyedabbasi, A. (2023). Metaheuristic Algorithms in IoT: Optimized Edge Node Localization. Springer in Engineering Applications of Modern Metaheuristics Book, Springer Nature,SCI series, Springer International Publishing, Switzerland,  ISBN: 978-3-031-16831-4, Vol. 1069, pp. 19-39. https://doi.org/10.1007/978-3-031-16832-1_2

Kiraz, B., Asta, S., Özcan, E., Köle, M., Etaner-Uyar, A.Ş. (2023). Empirical Comparison of Heuristic Optimisation Methods for Automated Car Setup. In: Akan, T., Anter, A.M., Etaner-Uyar, A.Ş., Oliva, D. (eds) Engineering Applications of Modern Metaheuristics. Studies in Computational Intelligence, vol 1069. Springer, Cham. https://doi.org/10.1007/978-3-031-16832-1_1

Zeybek, S. (2023). Prediction of the Remaining Useful Life of Engines for Remanufacturing Using a Semi-supervised Deep Learning Model Trained by the Bees Algorithm. In: Pham, D.T., Hartono, N. (eds) Intelligent Production and Manufacturing Optimisation—The Bees Algorithm Approach. Springer Series in Advanced Manufacturing. Springer, Cham. Doi:  https://doi.org/10.1007/978-3-031-14537-7_21 

Akan, E., Aktas-Dincer, H., Ari, F., Erkuş E.C., Farzin M., Gökçay, D., Ileri, F., Purutçuoğlu, V., Somuncuoglu, A. (2022). Evaluation of Data Compression Methods for Efficient Transport and Classification of Facial EMG Signals. Purutçuoğlu, V. Weber, G.W., Farnoudkia, H. (Ed.), Chapter In Operations Research: New Paradigms and Emerging Applications (pp 233-248), CRC Taylor and Francis.

Celep, Z. (2022). İstanbul’daki Molla Gürani Camii’nde Yapılan Güçlendirme Müdahaleleri- Restorasyon Yıllığı. Vakıflar Genel Müdürlüğü, cilt 23, sayfa 59-65.

Çiftçi, F. (2022). 3D Bioprinting for Neural Tissue Engineering, Bioprinting the Human, Nova Science Publishers, New Developments in Medical Research Series,  ISBN: 978-1-68507-993-2, DOI: https://doi.org/10.52305/PYRA1955

Çiftçi, F. (2022). Design of 3D-Printed Scaffolds, Bioprinting the Human, Nova Science Publishers, New Developments in Medical Research Series, ISBN: 978-1-68507-993-2, DOI: https://doi.org/10.52305/PYRA1955

Gündoğdu, Ö. (2022). Geleceğin Mühendisi. Paradigma Akademi, 1. baskı, sayfa 156-193, ISBN:978-625-8187-82-3.

Göncü, S., Silgu, A., Erdağı, M. G., Çelikoğlu, H.B. (2022). Sensitivity Analysis for a Cooperative Adaptive Cruise Control Car Following Model: Preliminary Findings. In: Moreno-Díaz, R., Pichler, F., Quesada-Arencibia, A. (eds) Computer Aided Systems Theory – EUROCAST 2022. EUROCAST 2022. Lecture Notes in Computer Science, vol 13789. Springer, Cham. DOİ:  https://doi.org/10.1007/978-3-031-25312-6_43

Özhan, O. (2022). Basic Transforms for Electrical Engineering. Springer Nature. ISBN 978-3-030-98845-6, ISBN 978-3-030-98846-3 (eBook), https://doi.org/10.1007/978-3-030-98846-3.

Silgu, M. A., Göksad, I. E., Hulagu, S., Aktı, S., Akova, H., Akyol, G., Göncü, S. Göksu, G., Çelikoğlu, H.B. (2022). A Methodology to Consider Explicitly Emissions in Dynamic User Equilibrium Assignment. In: Moreno-Díaz, R., Pichler, F., Quesada-Arencibia, A. (eds) Computer Aided Systems Theory – EUROCAST 2022. EUROCAST 2022. Lecture Notes in Computer Science, vol 13789. Springer, Cham. Doi: https://doi.org/10.1007/978-3-031-25312-6_42

Çiftçi, F., S. A. (2021). Materials for 3D Printing in Medicine: Metals, Polymers, Ceramics, and Hydrogels, Additive Manufacturing with Medical Applications, 1st Edition, Taylor & Francis Group, ISBN: 9781032110776

Özbay, B., Koç, E. (2021). Thermoplastic Polymers and Polymer Composites Used in SLS. Springer Handbook of Additive Manufacturing (kabul edildi, basım aşamasında).

Yılmaz, F. (2021). An Introduction to Trenchless Technology Piping. First Edition. Istanbul: Gülmat Publishing.

Celep, Z. (2020). Betonarme Taşıyıcı Sistemlerde Doğrusal Olmayan Davranış ve Çözümleme / Türkiye Bina Deprem Yönetmeliği (2018) Kavramları. Beşinci Baskı, xiv+317 sayfa, Beta Yayıncılık.

Celep, Z. (2020). Betonarme Yapılar. Onbirinci ve TBDY 2018’e uygun baskı, xx+855 sayfa, Beta Yayıncılık.

Celep, Z., Demir, F. (2020). Türkiye Bina Deprem Yönetmeliğinin Betonarme Binalara Uygulaması Üzerine, Betonarme Yapılar Semineri (2020). Seminer Kitabı sayfa 45-60, İTÜ İnşaat Fakültesi ve İnşaat Mühendisleri Odası İstanbul Şubesi.

Celep, Z. (2020). Yapı Dinamiği. Altıncı Baskı, xi+511 sayfa. Beta Yayıncılık.

Öztürk, S., Malkoç, D. (2020). Temel Fizik Deneyleri Mekanik & Elektrik. Birinci baskı, Fatih Sultan Mehmet Vakıf Üniversitesi Yayınları.

Celep, Z. (2019). Deprem Mühendisliğine Giriş ve Depreme Dayanıklı Yapı Tasarımı. Yedinci baskı, Beta Yayıncılık.

Celep, Z., Aydınoğlu, M. N., Özer, E., Özaydın, K. (2018). Türkiye Bina Deprem Yönetmeliği (TBDY-2018) Eğitim Sunumları / Açıklamalar ve Uygulama Örnekleri Kısım: - I: Genel Konular. TMMOB, İnşaat Mühendisleri Odası.

Çallıalp, F. (2018). Örneklerle Soyut Cebir. ISBN: 978*975-511-350-9, İstanbul: Birsen Yayınevi.

Celep, Z., Ahunbay, Z., Aköz, F., Altay, G., Arun, G., Erberik, M. A., İlki, A., Ünal, Z. G., Aydemir, O., Kuran, F., Şimşek, M., Ünlügedik, S., Çelik, S., Atasagun, D. F. (2017). Tarihi Yapılar için Deprem Risklerinin Yönetimi Kılavuzu. Ankara: Vakıflar Genel Müdürlüğü. ISBN 978-975-19-6779-4.

Nizam, A. (2017). Bilgisayar Bilimine Giriş (Bölüm Yazarı; Bölüm:10 Veri tabanı Yapısı ve Uygulamaları ve Bölüm 12: Nesneye Yönelik Tasarım Yaklaşımları). Papatya Bilim. ISBN: 6059594080.

Celep, Z., Baş, S., Apaydın, N. M. Free Vibration analysis and seismic performance assessment of two approach viaducts of Bosphorus Suspension Bridge. Chapter 6 in Developments in International Bridge Engineering Book (2015).  (DOI: 10.1007/978-3-319-19785-2_6; ISBN: 978-3-319-19784-5).

Morgül, A. (2015). Elektrik devreleri laboratuvarı deneyleri. Birinci basım, Fatih Sultan Mehmet Vakıf Üniversitesi Yayınları.

Nizam, A. (2015). Veri Tabanı Teorisi ve Uygulamaları. Papatya Yayıncılık Eğitim. ISBN: 6054220946.

Nizam, A. (2011). Veri Tabanı İlişkisel Veri Modeli ve Uygulamaları. Papatya Yayıncılık Eğitim. ISBN: 978-605-4220-28-1.